71cc Gas Powered Post Hole Digger - Air-Cooled 2-Stroke Engine with 4", 6", 8" Drill Bits - Heavy Duty Fence Installation & Landscaping Tool for Gardening, Farming, and Construction Projects
Free shipping on all orders over $50
7-15 days international
12 people viewing this product right now!
30-day free returns
Secure checkout
66795464
Description
Technical Details:Engine: Single Cylinder, 2-stroke, air-cooledCylinder capacity: 71ccFuel mix: 25/1Bits: 4 ", 6" and 8 "Bit length: 31 "Safety: Bit LockPower: 3.2kwCarburetor with pumpEasy starting system (cord starter). Centrifugal clutchChange bits quickly and easily Accessories:3 bits: 4 ", 6" and 8 "Extension Bar: 12 "Fuel Mixing BottleToolkit for assemblyTotally Weight: 45.5LBStart steps:1. Please remember to close the air door and then pull the starter (don’t forget this step, otherwise you will not be able to ignite when you deadlift)2. Pull the rope starter 3-5 times, the total length of the rope is 70cm, and the safety distance is 30-50cm. If the safety distance is exceeded, the rope will be broken, not the longer the rope is, the better3. After the start is successful, remember to open the damper (not to pull the starter when opening the damper. When the damper is opened, too much air enters and there is too little oxygen, it is difficult to start, so pull the starter when the damper is closed.After the machine starts successfully, open the damper。Pulling the starter to the end of 70cm will break the rope; the safety distance is 30-50cm, and pulling the rope hard will cause the rope to break. After breaking, you need to buy the starter again.
Features
▲LABOR-SAVING:Features a 71cc auger engine . Compared to the traditional manual digging tool, Eapmic gasoline powered post hole digger is equipped with an air-cooled two-stroke engine with low failure rate and easy maintenance, more labor-saving and efficient, reducing your outdoor work load. It is of light weight and can be used by one or two people.
▲EASY TO ASSAMBLE AND USE:According to the instructions contained in the package, you can easily install the digging machine. After a manual recoil start, the auger head of 71cc can start working immediately. The attached manual is a general version of a variety of products, so the accessories and parameters introduced will be slightly different. The product you received is complete and correct. If you have any questions about installation/operation, please contact the seller for assistance.
▲EFFECIENT BLADE DESIGN:4'' 6'' & 8'' drill bits are makes your digging more effecient. Even the toughest soil can be easily drilled through. The blade spacing is set to minimize the power required for drilling and to maximize the amount of loose soil removed from the holes. Ideal for installing wooden decorative fence or chain link fence, refitting deck and patio, planting trees or shrubs, drilling flag holes etc.
▲RUGGED DRILL BIT:With drill bit of black powder coated for rust and cor-ros-ion res-ista-nt protection. The drill bit is heavily measured to withstand bending and torque loads. Spiral blades increase structural strength.
▲ 100% Satisfaction Guarantee - 30-day return & refund policy. 7×24 Hours customer service. Contact us if you have any problems. The best solution will be provided for sure!
